Stainless fasteners and plant spares for agro-processing in Kenya
A2 and A4 stainless bolts, nuts and washers, stainless hose clips, conveyor belt fasteners, bucket elevator bolts and food-grade grease for tea, coffee, dairy, grain and food plants.
Made for washdown and wet floors
Stainless where water and cleaning chemicals reach, and the conveyor parts that move the crop. Kenya processed 701.5 million litres of milk in 2025, up 13.3% (KNBS Economic Survey 2026).
Stainless bolts and screws
A2 and A4 hex bolts, allen key screws and threaded rod.
Stainless nuts and washers
Hex, lock, dome and wing nuts; flat and spring washers.
Stainless hose clips
Worm-drive hose clips in stainless steel.
Conveyor and elevator parts
Belt fasteners, belt lacing and elevator bucket bolts.
Food-grade lubrication
Food-grade bearing grease and grease nipples.
Bearings
Pillow block bearings for shafts and conveyors.
Questions buyers ask
304 or 316 stainless for a food plant?
304 (A2) is the workhorse in brewing and dairy. 316 (A4) adds about 2% molybdenum and resists chlorides far better, so use A4 fasteners where brine, salt or chloride cleaners are present.
Why do bolt heads matter for hygiene?
Crevices under bolt heads trap soil and cleaning agents, and chlorides attack stainless quickly inside them. Domed fasteners with a sealing gasket remove the crevice; EHEDG hygienic design guidance covers the details.
Mechanical belt fasteners or vulcanising?
Mechanical fasteners can be fitted by the plant's own crew with common tools. Vulcanising usually needs specialist equipment and an outside crew, and can take 24 hours or more once scheduling is counted.
Do you supply food-grade grease?
Yes, a food-grade bearing grease for plants where lubricant may touch food, with grease nipples and guns to apply it.
What do stainless bolts and nuts cost in Kenya?
Prices come on a quote. Send the items, sizes and quantities on WhatsApp or through the website and the sales team replies with a priced quote you can accept online.
Read before you order
HSS, cobalt or SDS: the right drill bit for steel, stainless and concrete
Which drill bit for mild steel, stainless, brick and concrete: HSS DIN 338, cobalt, SDS Plus and SDS Max, with speeds, sizes and what 10/100/160 means.
Socket cap, countersunk, button or grub: choosing Allen screws
The four hex socket (Allen) screw heads, what each is for, the hex key size for every metric size, and when 12.9 black beats A2 stainless.
DIN 933 or DIN 931? Full thread vs half thread hex bolts
DIN 933 is threaded to the head, DIN 931 keeps a plain shank. Which one carries shear, which one suits tapped holes, how to pick the length and grade.
Stainless, zinc-plated or galvanised: fasteners for outdoor and coastal sites
Choosing fasteners that will not rust: zinc-plated indoors, hot-dip galvanised outdoors, stainless A2 and A4 by the sea, and the mistakes that cause early corrosion.
Inch or metric? Reading bolt sizes like 1/2" x 1-1/2" and M12 x 40
How to read and order inch and metric bolts: diameter first, then length, UNC, UNF and BSW threads, and why an M12 nut will not fit a 1/2 inch bolt.
Fixing steel to concrete: wedge, sleeve or chemical anchor?
Which anchor holds steel on concrete: wedge anchors, sleeve (rawl) bolts or chemical anchors, with sizes, installation steps and when to use each.
Bolt grades 4.8, 8.8, 10.9 and 12.9 explained: what HT means
What the numbers on a bolt head mean, when an 8.8 HT bolt is enough and when to use 10.9, which nut to pair with each grade, and DIN 931 versus DIN 933.
Paste your list, get one quote.
SKUs or plain descriptions with quantities, one per line. We match each line to a stocked product and send one priced quote.
